Navigate: Table of Contents, Previous, Next
You may install our IMU Viewer software to help you test your progress as you assemble the circuit. The IMU Viewer includes
tools to vizualize the board's sensor outputs.
To Install on Windows:
- Insert the CD-ROM into your CD-ROM drive.
- Navigate to the folder Win32/Imuviewer.
- Execute the setup.exe program (if you are reading this page directly off the cdrom, try this link to start setup.exe)
- Follow the on-screen instructions
One you have installed the software, it will create a program group on your Start menu named Rotomotion. Under this group
you will find the IMU Viewer executable.
Once started, you will need to set your serial port (1 or 2) and then press the Connect button. If you IMU is powered up and operating
correctly, you will see a Status indication turn green. From here, you can use the ADC tab to see raw ADC values or the IMU tab to
visualize the ADC in context of our IMU.
|
